| Home made white face gauges |
 |
 |
Take out your stock guages
Go to a copy shop that does color copies, pick whatever color
you want them to be, and have the copy shop do a reverse
(negative) copy of the guages onto that color contact paper.
Cut out the guages, and put over the stock gauge, cut out all the windows etc. w/ an exacto knife.
Work out any bubbles. I do recommend the heat set strongly otherwise they may start feeling off. Take an iron (no steam) and put a towel over the guages, press the iron down flat on it for a few seconds
re-install the gauges. Be sure to mark the needles when you take them off.
BE VERY CAREFUL REMOVING/REPLACING THE NEEDLES!!
Jack
| Sponsor Links |
|
|
|
|
|
|
|
