| Reseting Factory Keyless Entry |
 |
 |
In order to reset the codes for the keyless entry fob, you have to look into the trunk.
- There should be a module on the left side under the trunk matting by the fuel pump shutoff switch. You have to open that up and there should be two posts that are not connected.
- You have to jump the gap with a paper clip or something, then the locks will pop up and down.
- Press a button(any button) on the key fob and they should pop up and down again.
- You have now reset the code.
Jim Phelps
| Sponsor Links |
|
|
|
|
|
|
|
