| Changing Oil Sender Unit |
 |
 |
- Look under car's front bumper facia
- Remove the 4 or 5 blck push-pins that hold the rear part of the undershield blck gravel valance (it's separate from the wider frnt part that's riveted on)
- Drop it down.
- Then just look back and up towards the oil filter mounting housing and you'll see the sending unit (with the wire attached and a plastic cap) threaded into this oil filter housing.
- Unhook the wire and take the cap off.
- Take a wrench and unscrew the sender unit and put the new one in place.
MikeV
| Sponsor Links |
|
|
|
|
|
|
|
